Medorra Oxygen Concentrator Filters

Medorra Oxygen Concentrator External Foam Filters — 6-Pack

$107.25

Medorra equipment care

The right filter.
Ready for routine care.

Keep model-specific replacement filters available for your Medorra oxygen concentrator. Choose the option for your 5L or 10L unit. Each pack contains six external foam air-inlet filters; the concentrator is sold separately. Internal HEPA filters and secondary filter felt are not included.

For the Medorra 5L concentrator

Filter SKU: MED5LOXYCONFIL
Concentrator SKU: MED5LOXYCON
Pack size: 6 external foam filters

For the Medorra 10L concentrator

Filter SKU: MED10OXYCONFIL
Concentrator SKU: MED10OXYCON
Pack size: 6 external foam filters

Match both the model and the part. Each concentrator uses more than one filter component. Do not assume the 5L and 10L filters—or the washable inlet filter and internal filter—are interchangeable.

5L filter system & care guide

The 5L manual identifies a first foam filter and a secondary filter felt. Their care instructions are different.

First foam filter: Clean weekly with mild soap or neutral detergent, rinse thoroughly and let it dry completely before reinstalling. Replace if damaged or excessively dirty.
Secondary filter felt: Replace every 1,000 operating hours, as directed in the 5L manual.
Humidifier: Wash with warm water every three days and remove mineral deposits according to the manual.

5L manual diagram identifying first foam filter, secondary filter, covers and access window — 5L filter-system diagram from the user manual. Shows component locations, not the contents of the six-pack.

Read the complete 5L maintenance instructions (PDF).

10L filter system & care guide

The 10L manual identifies a foam air inlet filter and a HEPA filter. The HEPA filter is a separate component from the washable inlet filter.

Foam air inlet filter: Clean weekly with water and dry fully before reinstalling.
HEPA filter: Inspect at 800 operating hours. Replace if darkened, damaged or contaminated. The manual calls for inspection at this interval, not automatic replacement.
Humidifier: Clean and disinfect according to the 10L manual, then rinse thoroughly.

10L manual diagram identifying air inlet filter, HEPA filter and filter window — 10L filter-system diagram from the user manual. Shows component locations, not the contents of the six-pack.

Read the complete 10L maintenance instructions (PDF).

Before replacing a filter

Confirm the concentrator model and the exact filter component being replaced.
Switch the concentrator off and unplug it before maintenance.
Follow the replacement procedure in the correct model manual.
Wash only a component that the manual specifically identifies as washable. Do not wash an internal replacement filter unless its own instructions permit it.
Allow washable filters to dry fully before reinstalling. Never operate the concentrator without all required filters installed.
Use qualified service personnel when the procedure requires internal servicing.

Compatibility & ordering help

Send the concentrator item code, serial number and a clear photo of the filter you are replacing to info@medorra.com. We can help match the correct replacement part.

The maintenance diagrams show the complete filter system. They are reference illustrations and do not show the six-pack contents.